-52%

Polished Chrome Classic 1 Gang 45A Double Pole Decorative Rocker Switch with Neon (Vertical Plate)

Niglon
D-SP45LDPN-PCM
In stock
Double Pole Rocker
£30.99 £14.69
Niglon D-SP45LDPN-PCM Polished Chrome Classic 1 Gang 45A Double Pole Decorative Rocker Switch with Neon LED Light (Vertical Double Plate) Range: Niglon Premium Edge S Polished Chrome Classic Double Pole Rocker Switch with Neon | DSP45LDPNPCM Double Pole Switching with Neon Indicator Light. On a Vertical Twin Plate. Sleek, low profile classic faceplate. Decorative polished chrome flat plate curved...
£14.69

Niglon D-SP45LDPN-PCM Polished Chrome Classic 1 Gang 45A Double Pole Decorative Rocker Switch with Neon LED Light (Vertical Double Plate) 
Range: Niglon Premium Edge S Polished Chrome Classic Double Pole Rocker Switch with Neon | DSP45LDPNPCM 

Double Pole Switching with Neon Indicator Light. On a Vertical Twin Plate. Sleek, low profile classic faceplate. Decorative polished chrome flat plate curved edge modern vintage finish for stylish spaces. 

Dimensions: 146mm x 87mm x 22.5mm | Double Twin Vertical Plate | Faceplate Depth 4mm | Recommended Minimum Back Box Depth 47mm 
Finish: Polished Chrome | Control Finish: Decorative Rocker Switch 

Gang: 1 Gang | Pole: Double Pole Switching 
Maximum Load Rating: 45 Amp 
Electrical Information: 240V 50Hz Operating Voltage | 45A Maximum Current Rating | Terminal Size 6mm | Cable Size 4 x 4mm, 3 x 6mm Capacity or 1 x 10mm Capacity | BS EN 60669-1 Applicable Safety Standard | Torque Value 2.5Nm | Terminal Screws Steel & Yellow Passivated Silver "on-lay" Copper/Brass Contacts 
Intended Applications: IP20 Indoor Use Only 

Type: Vertical Double Pole Wall Switch with Neon Indication | Premium Cover Plate | 45A Wall Light & Electrical Switching | Home or Office Installation | High Grade Electric Double Pole Switch | Domestic or Commercial Applications

SHIPPING

Postage is only £4.50 per order for UK addresses. Free Delivery for orders over £75.00
DELIVERY SCHEDULE: We hold a large quantity of Varilight products in our warehouse, however to complete your order we may need to receive them direct from the manufacturer which can take a couple of days. Please allow 2-5 working days to receive. If you do have time constraints then contact us by email or call us on 0121 783 2726.

RETURNS POLICY

Consumers - We are happy to accept any returns within 14 days from order received. The products must be returned in a resaleable condition with no damage to the product or box. Full details of the returns policy can be found on our Terms of Business.
Business Customers - Please note we are unable to accept any returns from business customers. Full details of the returns policy can be found on our Terms of Business.

If you are unsure of any product or policy offered by The Switch Store then please feel free to email us at switches@birco-online.co.uk or tel 0121 783 2726.

PRODUCT CARE
Decorative products should be treated with great care when cleaning. Excessive scrubbing or the application of abrasive cleaning products may permanently damage the quality of the finish.
We recommend cleaning with a damp soft cloth. The application of detergents is not recommended. Dilute any detergents you do intend to use and always wipe away with a damp cloth to remove any traces of detergent before allowing the product to air dry.
Do not use masking tape on any decorative products. The adhesive may chemically bond with the surface finish.
For screwless products we recommend removing the faceplate and taking care not to paint over the plastic clips as this may prevent the faceplate from clipping back on.
For products with visible fixing screws we recommend turning off the mains power, removing the fixing screws and pulling the product gently away from the wall taking care that the wires remain fully fixed into their terminals.
When the product is clear of the wall, cover it with a plastic bag and use an elastic band to secure behind the product. You can then paint or wallpaper the wall.
Please note that it can take several weeks for the chemicals in paint or wallpaper paste to become inert. Before this time there is a danger that they will react with the product if it has a metal faceplate. For this reason we recommend using a plastic bag as a temporary gasket between the product and the wall once it is dry to the touch. In other words, use the plastic to form a barrier between the product and the surface of the wall.
Have Questions?Ask An Expert
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top
Sale

Unavailable

Sold Out