Varilight XK2OW Light Oak Kilnwood 2 Gang 10A 1 or 2 Way White Rocker Switch
Range: Varilight Light Oak Kilnwood Rocker Switch | XK2OW
1 or 2 Way Switching. Suitable for controlling both mains and low voltage lighting. Made from high grade sustainable timber. A modern vintage real light oak wooden finish for the stylish areas of your home or office.
Dimensions: 96mm x 96mm x 25mm | Faceplate Depth 15mm | Recommended Back Box Depth 16mm
Finish: Light Oak Wood | Control Finish: White Rocker Switches
Gang: 2 Gang | Way: 1 or 2-Way Switching
Maximum Load Rating: 10 Amp
Electrical Information: 220/250V AC Operating Voltage | 10A Maximum Current Rating | 3.3mm Terminal (Live) Diameter - 3.3mm Terminal (Earth) Diameter | 3 x 1.5mm2 Capacity | BS EN 60669-2-1 Applicable Safety Standard
Intended Applications: Indoor Use Only. Domestic lighting circuits. Product must be Earthed.
Postage is only £4.50 per order for UK addresses. Free Delivery for orders over £75.00
DELIVERY SCHEDULE: We hold a large quantity of Varilight products in our warehouse, however to complete your order we may need to receive them direct from the manufacturer which can take a couple of days. Please allow 2-5 working days to receive. If you do have time constraints then contact us by email or call us on 0121 783 2726.
Consumers - We are happy to accept any returns within 14 days from order received. The products must be returned in a resaleable condition with no damage to the product or box. Full details of the returns policy can be found on our Terms of Business.
Business Customers - Please note we are unable to accept any returns from business customers. Full details of the returns policy can be found on our Terms of Business.
If you are unsure of any product or policy offered by The Switch Store then please feel free to email us at firstname.lastname@example.org or tel 0121 783 2726.
Decorative products should be treated with great care when cleaning. Excessive scrubbing or the application of abrasive cleaning products may permanently damage the quality of the finish.
We recommend cleaning with a damp soft cloth. The application of detergents is not recommended. Dilute any detergents you do intend to use and always wipe away with a damp cloth to remove any traces of detergent before allowing the product to air dry.
Do not use masking tape on any decorative products. The adhesive may chemically bond with the surface finish.
For screwless products we recommend removing the faceplate and taking care not to paint over the plastic clips as this may prevent the faceplate from clipping back on.
For products with visible fixing screws we recommend turning off the mains power, removing the fixing screws and pulling the product gently away from the wall taking care that the wires remain fully fixed into their terminals.
When the product is clear of the wall, cover it with a plastic bag and use an elastic band to secure behind the product. You can then paint or wallpaper the wall.
Please note that it can take several weeks for the chemicals in paint or wallpaper paste to become inert. Before this time there is a danger that they will react with the product if it has a metal faceplate. For this reason we recommend using a plastic bag as a temporary gasket between the product and the wall once it is dry to the touch. In other words, use the plastic to form a barrier between the product and the surface of the wall.